• £300.00

    In very nice, used condition. Has foam insert and is very durable!..


    Super quality Filter set from FLI OIII HA SII 8nm bandwidth ..


    Built like a tank and super strongHas the hole patterns that matche Paramount versa plates..


    In very nice used condition, a very beautiful solid saddle..


    In mint boxed condition, a beautiful addition to the D-lux 4..


    Very very stiff and needs to be a warm day for the zoom to even start zooming, It will need a full service or taking apart by someone who knows what they are doingSold as spares or repairs no returns ..


    A good quality Meade wedge in good used condition. This includes the LX90 adapter plate and only items you see in the picturesIf there are no extra screws/fittings int he image, then assume that they are not included...


    In very nice used condition..


    A very nice quality goto mount, in quite superb clean condition Supplied with Inova goto Controller upgraded heavy duty Literoc tripod and GPS dongle..


    In good used condition, perfect for those that need a new rear end..


    In nice clean condition and supplied in a metal case, whats pictured is whats included Details from the web below when new: An Off-Axis Guider is an astroimaging accessory considered by many to be the most accurate method of autoguiding. The Celestron Off-Axis Guider uses a large 12.5mm prism to intercept a small portion of the telescope’s focal plane (outside the field of view of the main imaging camera) to locate a guide star. Any movement seen by the guide star will be the exact same movement seen by the imaging camera. Guiding this way will correct for tracking errors, as well as opto-mechanical errors or flexure, for pinpoint round stars.Off-Axis Guiders have been around for a long time, but typically pose three main challenges:Finding a guide star from the far edges of the telescope’s focal plane can be difficult, considering the small field of view and sometimes less-than-ideal illumination.Getting both imaging camera and autoguider to reach focus with one another is time consuming and sometimes requires experimentation.Additional spacers and adapters are usually required for your particular camera, telescope, and autoguider, which adds to cost and complexity.Celestron's Off-Axis Guider addresses these challenges by:Providing a large 12.5mm prism that can be adjusted to move closer to the center of the telescope’s focal plane, depending on the size of the imaging camera. This results in brighter guide stars, with the help of the large prism to fully illuminate the autoguider sensor.Featuring a high-quality, fixed-orientation Helical focuser. This provides extremely smooth and accurate focus of the autoguider without changing (or twisting) the autoguider camera orientation.Including all the needed spacers and adapters are included for most common imaging configurations, including DSLR cameras, Nightscape CCD cameras, and more. The following adapters are included: SCT/EdgeHD, female M48, female M42 (T-thread), male M48, male M42 (T-thread), 3 T-thread spacersNOTE: The Celestron Off-Axis Guider is not compatible for DSLR imaging with the 8" EDGE-HD Focal Reducer. ..


    in mint condition and includes the much needed wifi booster as well as a memory card..


    For polar aligning telescopes when on an equatorial wedge, will work with Meade and Celestron SCT Telescopes. These do not come up for sale very often and are getting harder and harder to find! They are a simple and effective way of polar aligning any wedge mounted SCT in a few minutes..


    still sealedDescription The Paramount ME II Counterweight Shaft Extension Bar (sold separately) can be attached to the female end of the 1.875-inch Paramount ME II counterweight shaft.SpecificationsLength: 24.6 cm (9.7 in.)Diameter: 4.86 cm (1.875 in.)Weight: 3.2 kg (7 lb.)Capacity: Up to 2 additional 9 kg (20 lb.) counterweights..


    In good, used condition...


    In average used conditionsome marks from use..

Roboscopes - Affordable Deep Sky Imaging